Fortron FSP2000 2000W 2000W (80 plus no)

Още за Fortron FSP2000 2000W 2000W

Fortron FSP FSP2000-A0AGPBI

FSP releases a powerful 2000 watt dedicated mining power supply

The topic of Bitcoin mining continues trending. Some countries even acknowledge payment with digital currency such as Bitcoin as legal payment methods. In order to keep up with this trend, high specification dedicated mining equipment is continually released by the industry.

ASUS and ASRock have released mining dedicated motherboards, and high-end graphics cards from major manufacturers such as nVIDIA and AMD, etc. have all been sold out.

With the upgrading of this equipment, the power needed for overall operation of computers also needs to be increased in response to the power needed for the heavy operation during the mining process. However, currently there are very few power supplies on the market dedicated for mining.

FSP power fully understands the needs of miners, and became the first to release the FSP2000-A0AGPBI 2000 watt super high powered power supply to prevent power malfunctions during the mining process when the processor/graphics card is operating at full speed and the power is at full-load 24 hours a day.

The features of a professional power supply dedicated for mining systems include high wattage, support for multiple sets of slots, all module connectors, high stability and high efficiency, etc.

Under 230 volt input voltage, FSP2000-A0AGPBI is able to provide full 2000 watt power to ensure there is sufficient power provided for the computer equipment, maintain smooth operation, and prevent rebooting or power interruptions.

In addition, FSP2000-A0AGPBI is equipped with 16 sets of PCI-E 6+2 PIN slots and is able to support operation for a maximum of 16 graphics cards simultaneously, allowing miners to run their mining equipment under full-load.

It’s full module connector design makes it easier for users to connect and disconnect cables, find the problem and save troubleshooting time when something goes wrong with the system. FSP2000-A0AGPBI is an industrial grade power supply, able to accept a 90-264 volt full-range voltage input.

It has also passed high temperature and humidity tolerance, overvoltage, overcurrent and long-term operation tests to ensure that it can still provide power stably under rigorous mining environments.

Also, since mining equipment needs to operate 24 hours a day without interruptions, FSP2000-A0AGPBI has 80PLUS platinum certified excellent power efficiency that can allow users to save on power bills and relatively increase the mining profit significantly.

Due to the fact that large wattage power supplies are difficult to acquire from current markets, most miners can only adapt and buy small wattage power supplies or use two power supply units to supply power for a single host.

However, since the power supplies are under heavy or partial loads for extended periods of times, not only do they have to bear the malfunction problems that may be caused due to parallel connections of the power supplies, the frequent RMA also becomes an additional cost burden.

Not only that, there are frequent foreign and domestic reports of fire incidents at mining locations or burnt mining equipment due to poor power quality. Therefore as a long-term investment miner, the importance of a power supply must be considered carefully. 

FSP2000-A0AGPBI

Feature

• 80PLUS Platinum
• Input Circuit 100% High Voltage Tested
• Up to 16 x PCI-E 6+2 PIN Connectors
• Full Modular Design, 200mm Length
• Low Ripple & Noise
• Output Over Voltage Protection
• Short Circuit Protection on All Outputs
• Resettable Power Shut Down
• 100% Burn-In Test Under 50℃ High Ambient Temperature
• MTBF: 100K Hours at 25℃ Ambient Temperature
• 100% Hi-Pot Tested Line Input Fuse Protection

Introduction

FSP2000-A0AGPBI is an industrial level of switching power supply. The power supply comes to offer the total power capacity up to 2000 Watts and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, FSP2000-A0AGPBI comes with 16 PCI-E 6+2 pin connectors, the power supply is ideally the best choice for server, workstation, GPGPU, even the mining machine/AI/deep learning applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.

Application

For standard, advanced workstation, server and industrial power system.

Notice:

Using the power supply for mining will negate the warranty of the power supply except additional contract.

Model Name	FSP2000-A0AGPBI
Wattage	2000W
Dimension	200mm (L) × 150 mm (W) × 86mm (H)
Product Highlight	Efficiency Level	80 Plus Platinum
	Altitude	5000M
General Specification	Effciency	92% @ 115V / 93% @ 230V
	Voltage Regulation	+3.3V, +12V, +5V, +5SB: ±5% -12V: ±10%
Input Electrical Specification	Input Frequency	47 ~ 63 Hz
	Input Current	115V@ 15.0 Amps-rms maximum 230V@ 12.0 Amps-rms maximum
Output Specification	Hold-up time	115V/60Hz 17mSec. Minimum@100% Load, 230V/50Hz 17mSec. Minimum@100% Load
	Ouput Voltage Regulation	+3.3Vdc output : +3.76 Vdc minimum, + 4.8Vdc maximum +5Vdc output : +5.75 Vdc minimum, + 7.0Vdc maximum +12Vdc output : +13.5 Vdc minimum, + 15.5Vdc maximum
	Ripple & Noise	115V-rms/230V-rms 5V 20ms Maximum 115V-rms/230V-rms 12V 20ms Maximum
	Over current protection	3.3V:50mV p-p 5V:50mV p-p 12V1:120mV p-p -12V:120mV p-p 5Vsb:50mV p-p
Environmental Requirement	Temperature Range	Operating : 0 to +50℃ Storage :-20 to +80℃
	Humidity	Operating : 10-90% to % RH, Non-condensing Storage : 95% to % RH, Non-condensing
	MBTF	The power supply have a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25℃, maximum-output load, and nominal AC inout voltage
Safety	CE,FCC,TUV,UL/cUL

Output Voltage and Current Rating

	+3.3V	+5V	+12V1	+12V2	+12V3	+12V4	+12V5	+12V6	-12V	+5Vsb
Ripple-Noise(R-P) mV	50mV	50mV	120mV	120mV	120mV	120mV	120mV	120mV	120mV	50mV
Regulation Load %	±5%	±5%	±5%	±5%	±5%	±5%	±5%	±5%	±10%	±5%
Output Max.(A)	25A	25A	30A	30A	30A	30A	30A	30A	0.5A	4A
Output Min.(A)	0A	0.1A	0.2A	0.2A	0.2A	0.2A	0.2A	0.2A	0A	0A

Notes

• Maximum continuous total DC output power should not exceed 2000W.
• Maximum continuous combined load on +3.3DC and +5VDC outputs shall not exceed 150W.
• Ripple and noise measurements shall be made under all specified load conditions through a single pole low pass filter with 20MHz cutoff frequency. Outputs shall bypassed at the connector with a 0.1uF ceramic disk capacitor and a 10uF electrolytic capacitor to simulate system loading.

Гаранционен срок: 36 месеца
* Ако производителя дава по-голям гаранционен срок, гаранцията се поема от производителя, след изтичането на гаранцията дадена от София Компютърс.